Tungsten Oxide

Bismuth tungstate is a popular new visible light catalyst, especially petal shaped bismuth tungstate. It has good light absorption and high stability, and has broad application prospects in the field of photocatalysis. The scholars in our country believe that the proper doping of bismuth tungstate, the preparation of semiconductor compound and assistant modification are effective ways to improve the photocatalytic property of bismuth tungstate. In recent years, graphene has brought tremendous changes to the material industry because of its unique two-dimensional structure, large specific surface area and high electron transmission rate. It has been recognized as the "king of new materials", Chinese scholars believe that graphene as an efficient electronic additive, and Bi 2 WO 6  composite catalyst, will greatly improve its light capture electronic capabilities, thereby enhancing catalytic capacity. However, scholars believe that only graphene is not enough, and the number o...

Ammonium metatungstate (AMT) is one of the most important raw materials and precursors for the preparation of WC. The structure and properties of WC are affected by the physical and chemical properties of precursor. The particle size and structure of precursor will greatly influence the process of reduction and carbonization in the late stage, and then affect the catalytic activity of WC catalyst. In order to obtain precursor with good particle size and good structure, spray drying is usually used. Spray drying has many advantages, such as simple process, no pollution, homogeneous composition, and suitable for mass production. The basic principle of spray drying method is ammonium metatungstate solution by spray drying, in a few seconds, water quickly evaporated into powder, physical and chemical properties of homogeneous granular, hollow spherical or spherical solid products. Many scholars have found that in the spray drying process, the concentration of ammonium tungstate solution h...

  Rubidium, as a rare and weak alkali metal element, has been widely used in organic catalysts, photomultiplier tubes, special glass and anticancer drugs. Rubidium does not have independent minerals, often and other alkali metals coexist in lithium mica, cesium garnet, lithium cesium garnet, natural carnallite, salt lake brine and underground brine. Because of the coexistence of rubidium and sodium and cesium, which are closely related to the physical and chemical properties, the extraction technology of rubidium is very difficult, which results in a large amount of brine rubidium resources not being rationally utilized. The common methods for separation of rubidium and cesium are fractional crystallization, precipitation, solvent extraction and ion exchange. In industrial production, precipitation method is used to separate rubidium and cesium, which is mainly used to separate rubidium and cesium from high content solution. Solvent extraction is easy to realize continuous operatio...

Ammonium paratungstate (APT) is the main raw material for the production of tungsten powder, tungsten carbide powder, tungsten wire and tungsten products. As everyone knows, the tungsten particle size, crystal morphology of its APT has a great "inherited" relationship, so, if want to produce nanometer tungsten powder and tungsten carbide powder, we first need to prepare ultrafine ammonium paratungstate (APT). It is an innovative method to prepare superfine ammonium paratungstate (APT) by microwave ultrasonic combined crystallization. Many scholars have shown that compared with traditional heating crystallization, microwave ultrasonic combined crystallization has obvious advantages in speeding up the crystallization rate, refining the particle size and improving the purity of products. So what's the difference between microwave - ultrasonic combined crystallization and traditional evaporation crystallization? Some scholars have used microwave-ultrasonic combined crystalli...

  In recent years, because bismuth tungstate (Bi 2 WO 6 ) has narrower band gap and wider visible range than titanium dioxide (TiO 2 ), it has a great tendency to replace TiO 2 . However, in practical applications, it was found that bismuth tungate is good, but there are some shortcomings, mainly in its photogenerated electrons and holes easy to complex, quantum efficiency is not high. Therefore, scholars believe that bismuth tungstate should be added with some elements to excite the photocatalytic potential of bismuth tungstate. Some scholars have made Au (Ag) / Bi 2 WO 6  nanocomposites with bismuth tungstate doped with gold or silver. The results show that the degradation efficiency of RhB solution is 40% using Au (Ag) / Bi 2 WO 6  nano photocatalyst, and the efficiency is 99.2%, higher than that of pure Bi 2 WO 6 . Some scholars have suggested that the Pt/Bi 2 WO 6  composite can be used for photocatalytic degradation of Mo methyl orange by doping bismuth with p...

With the vigorous development of the new energy vehicle industry, the demand for power lithium-ion battery continues to heat up, causing many lithium-ion battery materials to face supply shortages. Many people in the industry said that whoever has the upstream lithium resources, nickel resources and cobalt resources will have the initiative to develop power batteries. In view of the above situation, perhaps tungsten resources can effectively alleviate it. It is reported that in recent years, energy storage scientists have developed a lithium-ion battery using nano tungsten oxide as the electrode material, which has good physical and chemical stability, strong endurance and the advantage of civilian prices, mainly because of the oxidation tungsten powder is easy to prepare and has relatively new photoelectric properties. In addition, China is the country with the most abundant tungsten resources in the world, distributed in 23 provinces and autonomous regions, and its output rank...

As the lithium-ion batteries that power most phones, laptops, and electric vehicles become increasingly fast-charging and high-performing, they also grow increasingly expensive and flammable. In research published recently in Energy Storage Materials, a team of engineers at Rensselaer Polytechnic Institute demonstrated how they could — by using aqueous electrolytes instead of the typical organic electrolytes — assemble a substantially safer, cost-efficient battery that still performs well. If you were to take a look inside a battery, you’d find two electrodes — an anode and a cathode. These electrodes are immersed in a liquid electrolyte that conducts ions as the battery charges and discharges. Aqueous electrolytes have been eyed for that role because of their non-flammable nature and because, unlike non-aqueous electrolytes, they aren’t sensitive to moisture in the manufacturing process, making them easier to work with and less expensive. The biggest challenge with th...