Tungsten Oxide

A varistor is an electronic component with an electrical resistance that varies with the applied voltage. Also known as a voltage-dependent resistor (VDR), it has a nonlinear, non-ohmic current–voltage characteristic that is similar to that of a diode. In contrast to a diode however, it has the same characteristic for both directions of traversing current. At low voltage it has a high electrical resistance which decreases as the voltage is raised. Varistors are used as control or compensation elements in circuits either to provide optimal operating conditions or to protect against excessive transient voltages. When used as protection devices, they shunt the current created by the excessive voltage away from sensitive components when triggered. In recent years, studies on low-voltage varistor materials have gotten widespread attention, such as TiO2, Sr TiO3 and WO3. In 1994, WO3 ceramics nonlinear behavior was first reported. The study shows that tungsten oxide ceramic mat...

Tungsten oxide (WO3) is an extremely important high-tech materials, this material is non-linear, high-dielectric constant, electrochromic, with gas detection, chemical catalysis and other features. For the features of WO3, the nano-powder of WO3 can be fired into varistor ceramics, ceramic capacitors, light (electricity) color ceramic film, gas-sensing ceramics, photocatalytic degradation ceramic membrane, battery electrode ceramic materials, microwave absorbing ceramic film, new high-temperature thermoelectric ceramics and functional ceramics and ceramic films, which has great potential in many chemical, energy, electricity and other fields. There are two preparation methods of ceramic raw materials, that mechanical disruption and synthesis. The former one uses mechanical principle crushing coarse particles to obtain fine powder, which has the advantages of large amount of production and low cost, but there are problems of impurities mixed in the crushing process, and it is dif...

The nonlinear tungsten oxide ceramic (pressure-sensitive behavior) was first reported by Makarov in 1994, and it’s pointed out that it can be used as a low pressure-sensitive materials in the field of microelectronics since the WO3 ceramics has low varistor voltage. But there are not further studies and reports in earlier studies about behavior origin and mechanism of WO3 ceramics issues. Research shows that the varistor characteristics of WO3 ceramic is different from traditional ZnO and SnO2 Varistor material, the conventional Schottky barrier model can not explain the behavior of WO3 ceramic varistor yet, so the conventional grain boundary Schottky barrier model needs to be modified. In view of which, WO3 ceramics was prepared, and the mechanism of the pressure-sensitive characteristics were studied, and amendments WO3 ceramic grain boundary Schottky barrier model was proposed. Undoped WO3 ceramics sintered has obvious varistor behavior, AES spectra shows the ceramic crys...

A varistor is an electronic component with an electrical resistance that varies with the applied voltage. Also known as a voltage-dependent resistor (VDR), it has a nonlinear, non-ohmic current–voltage characteristic that is similar to that of a diode. In contrast to a diode however, it has the same characteristic for both directions of traversing current. At low voltage it has a high electrical resistance which decreases as the voltage is raised. Varistors are used as control or compensation elements in circuits either to provide optimal operating conditions or to protect against excessive transient voltages. When used as protection devices, they shunt the current created by the excessive voltage away from sensitive components when triggered. In recent years, studies on low-voltage varistor materials have gotten widespread attention, such as TiO2, Sr TiO3 and WO3. In 1994, tungsten oxide ceramics nonlinear behavior was first reported. The study shows that WO3 ceramic materia...